Alcohol Pumps
Alcohol pumps
WITTE alcohol pumps are gear pumps from the chemical series and are used for transfer tasks as well as for hydraulic and dosing applications.
The alcohol pumps of the CHEM series are exclusively designed and assembled in Germany. On request, we install the pumps directly at our customers' premises and are on site during commissioning. We also offer a comprehensive maintenance and repair service for the CHEM series.
The alcohol pumps of the CHEM series are exclusively designed and assembled in Germany. On request, we install the pumps directly at our customers' premises and are on site during commissioning. We also offer a comprehensive maintenance and repair service for the CHEM series.
- Alcohol pumps of the CHEM series are extremely flexible in their design.
- Alcohol pumps for differential pressures up to 120 Bar, suction pressures vacuum up to 15 Bar
- Alcohol pumps for temperatures up to max. 500 °C in combination with a magnetic coupling.
- Alcohol pumps for viscosities up to 1,000,000 mPas or higher.
- Alcohol pumps made of stainless steel, ceramics and special materials
Alcohol pumps for dosing tasks
Dosing pumps for organic and inorganic chemicals, circulation pumps for hydraulic fluids, feed pumps for chemicals, demanding, abrasive or corrosive media transfer pumps for additives, alcohols, lyes or basesMagnetic coupling pumps for safe operation with critical media according to the requirements of TA LuftTauch pumps for emptying containers and drums.
Applications of our alcohol pumps
Our alcohol pumps from WITTE are suitable for the following areas of application.
Media to be conveyed and dosing of:
- Strong alkaline solutions
- Bases
- Alcohols
- Additives
- Organic chemicals
- Inorganic chemicals
- Abrasive media
- Corrosive media
- Brine
- Liquid sulphur
- Esters
- Resins
- Glycerine
- Hardeners
- Isocyanates
- Phenols
- Acids
- Asphalt
- Bitumen
- Tar
- Hotmelt
- Glues
- Chewing gum mass
- Amino acids
- Lotions
- Shampoos
Further areas of application:
- EX-area, zone 1
- EX-area, zone 2
- EX-area, zone 21
- EX-area, zone 22
- Pharmaceutical industry
- Chemical industry
- Food industry
- Laboratories
- Cosmetic industry
Technical data of our alcohol pumps
Technical fields of application:
- For viscosity up to 1,000,000 mPas
- Temperatures up to 500 °C as special design
- Differential pressures up to 120 bar
- Vacuum suction pressures up to 15 bar
Technical specifications:
- Magnetic coupling
- Mechanical seal
- Stuffing boxes
- Hydraulic heating
- Electric heating
Alcohol pumps with housings:
- Special steel
- Tantalum
- Titanium
- Hastelloy®
- Ceramics
- and further special materials
Alcohol pumps with gear wheels and plain bearings made of:
- Special steel
- Ceramics
- Hastelloy®
- SiC
- Zirconium oxide
- Ferralium®
- Ferro Titanite®
- NiAg
- 1,4112
- 1,4571
- with various coats for higher durability
Alcohol pumps for the chemical industry
In addition to standard chemical pumps, we also supply alcohol pumps according to special customer requirements. We take over the complete engineering, as well as the research and development work.
We can also carry out test runs close to real operating points on our in-house test bench.
We have already realized special chemical pumps according to customer requirements in a wide variety of designs. For example, ceramic pumps for pumping high-temperature brine operating at temperatures above 500 °C.
Pumps for extreme design pressures up to 575 bar are also part of our portfolio. The process is often significantly improved through the use of these pumps.
If you have any questions regarding the development of special pumps or the use of special materials, please contact our materials expert and sales manager Mr. Carsten Pump.
We can also carry out test runs close to real operating points on our in-house test bench.
We have already realized special chemical pumps according to customer requirements in a wide variety of designs. For example, ceramic pumps for pumping high-temperature brine operating at temperatures above 500 °C.
Pumps for extreme design pressures up to 575 bar are also part of our portfolio. The process is often significantly improved through the use of these pumps.
If you have any questions regarding the development of special pumps or the use of special materials, please contact our materials expert and sales manager Mr. Carsten Pump.
Manufacturers, Traders, Service, providerSupplier
WITTE PUMPS & TECHNOLOGY GmbH
FOLLOW US 
WITTE WORLWIDE
© 2017 | WITTE PUMPS & TECHNOLOGY GmbH