Pressure Pumps
Pressure Pumps
WITTE gear pumps of the BOOSTER series provide the required process pressure in the systems. The pressure pumps impress with their extremely robust design and thus guarantee precise and reliable pressure build-up.
- Pressure pumps for differential pressures up to 250 bar
- Pressure pumps with suction pressures from vacuum to max. 120 bar
- Pressure pumps for viscosities up to 40,000 Pas
- Pressure pumps with flow rates from 10 kg/h to 30,000 kg/h
- Pressure pumps with delivery volumes from 4.7 ccm/U to 12,000 ccm/U
- Pressure pumps for processing polymers
These BOOSTER pumps can play off their advantages perfectly, especially when processing highly viscous polymer melts. A wide range of special materials is available for particularly demanding media with corrosive or abrasive properties. The pumps can thus be matched precisely to the application and case of application, thus achieving long service lives and optimum efficiencies.
Conversion service for booster pumps and high-pressure pumps:
We also rebuild existing makes of other manufacturers according to your wishes. We can fall back on a wide range of shafts, bearings and seals in various materials. Many of the parts are available in our bearings in Germany, USA and China.
Applications of our pressure pumps
WITTE pressure pumps are suitable for the following applications.
Media to be fed and metered-out:
- ABS
- Biopolymers
- HIPS
- PA
- PBT
- PC
- PE
- PET
- POM
- PP
- PS
- SAN
Further fields of application of our discharge pumps:
- Polymer process
- Polymer production
- Prepolymer production
- Reactor drainage
- Molten mass feed
Technical data of our pressure pumps
Technical fields of application:
- Differential pressures up to 250 bar
- Suction pressures up to 120 bar
- Temperatures up to 350 degrees
- Differential pressure up to 350 bar
- Viscosities up to 40 000 Pas
Technical specifications:
- Threaded shaft seal made of aluminium Bronze
- Vacuum threaded shaft seal
- Stuffing box packing
- Square housing shape
- Round housing
- Heating with heat transfer oil or steam
Pressure pumps with delivery volume of:
- 1,28 ccm/U
- 2,78 ccm/U
- 4,7 ccm/U
- 10,2 ccm/U
- 25.6 ccm/U
- 46,3 ccm/U
- 92,6 ccm/U
- 176 ccm/U
- 371 ccm/U
- 716 ccm/U
- 1342 ccm/U
- 3200 ccm/U
- 6100 ccm/U
- 12000 ccm/U
Pressure pumps with flow rates from:
- 20 - 200 l/h
- 40 - 400 l/h
- 70 - 700 l/h
- 140 - 1.400 l/h
- 280 - 2.800 l/h
- 410 - 4.100l/h
- 650 - 6.500 l/h
- 990 - 9.900 l/h
- 1.600 -16.200 l/h
- 2.500 - 25.300 l/h
- 3.800 -37.800 l/h
- 6.900 - 69.100 l/h
- 11.000 - 106.000l/h
- 17.000 - 170.000 l/h
Pressure pumps with housings:
- High-temperature carbon steel
- Optionally with coatings for increased load capacity
- 1.6582
- Stainless steel 1.4313
Pressure pumps with gear wheels and plain bearings:
- Tool steel
- Nitriding steel
- NiAG
- Shafts equipped with arrow toothing on request
- Aluminium bronze
- Optionally with coatings for higher resistance
Special pump construction for pressure pumps
High-pressure pumps of the BOOSTER series are used in polymer production to build up the required process pressure. Our BOOSTER pumps are available in round or square designs. At the customer's request, we can modify the pumps so that they can be installed in the same place in the system as replacement pumps with identical dimensions but increased throughput. A conversion of reactors, pipes or flange connections is not necessary. Special designs according to customer requirements are also possible.
Positive Displacement Pumps
Manufacturers, Traders, Service provider
WITTE PUMPS & TECHNOLOGY GmbH
FOLLOW US 
WITTE WORLWIDE
© 2017 | WITTE PUMPS & TECHNOLOGY GmbH