Reactor Pumps
Reactor Pumps
The WITTE reactor pumps are the discharge pumps of the POLY series. These pumps are used for emptying melt reactors in polymer production. Viscous polymer melt is sucked out of the reactor and conveyed through the pump. POLY pumps are used at different points in the process.
- Reactor pump with viscosities up to 40,000 Pas
Conversion service for reactor pumps:
Other makes of gear pumps from other manufacturers are rebuilt in our workshops and equipped with higher quality and more durable shafts, bearings and seals. This allows throughputs to be increased and maintenance intervals to be extended. A cost-intensive new acquisition can thus be avoided. We can supply these spare parts for many makes of other large, well-known manufacturers. Especially for large discharge pumps, retrofitting can lead to significant improvements in the process and the end product.
Applications of our reactor pumps
WITTE reactor pumps are suitable for the following applications.
Technical fields of application:
- Viscosities up to 40.000 Pas
- Temperatures up to 350 °C degrees
- Differential pressures up to 250 bar
- Suction pressures from vacuum to 10 bar
Technical specifications:
- from 3 l/h to 52,000 l/h flow rate
- from 4.7 ccm/rev to 25,000 ccm/rev Conveying volume
Reactor pumps with delivery volume of:
- 4.7 ccm/rev
- 10.2 ccm/rev
- 25.6 ccm/rev
- 46.3 ccm/rev
- 92.6 ccm/rev
- 176 ccm/rev
- 371 ccm/rev
- 716 ccm/rev
- 1,482 ccm/rev
- 3,200 ccm/rev
- 6,100 ccm/rev
- 12,000 ccm/rev
- 18,000 ccm/rev
- 25,000 ccm/rev
Reactor pumps with flow rates from:
- 3 - 56 l/h
- 6 - 92 l/h
- 15 -230 l/h
- 28 - 417 l/h
- 55 -722 l/h
- 105 - 1.370 l/h
- 222 - 2.890 l/h
- 430 - 4.700 l/h
- 900 - 8.850 l/h
- 1.920 - 17.000 l/h
- 3.660 - 32.000 l/h
- 6.590 - 58.000 l/h
- 13.000 - 40.000 l/h
- 17.000 - 52.000 l/h
Technical data of our reactor pumps
Technical specifications:
- Vacuum threaded shaft seal
- blocked stuffing box
- blocked lip seals
- double locked mechanical seal
- Combinations of different sealing variants possible
- Heating with heat transfer oil
- Steam heating
Further fields of application for our reactor pumps:
- polymer process
- polymer production
- Pre-polymer preparation
- reactor discharge
- melt conveying
Reactor pumps with housings:
- stainless steel
- steel
- Optionally with coatings for increased durability
Reactor pumps with gears and plain bearings:
- tool steel
- aluminium bronze
- NiAg
- with different coatings for higher durability
Media to be conveyed and dosing of:
- ABS
- Biopolymers
- HIPS
- PA
- PBT
- PC
- PE
- PET
- POM
- PP
- PS
- SAN
Reactor pumps for the polymer industry
We can offer WITTE reactor pumps in different versions, with square or round inlet or with shortened inlet flange. Alternatively, we also develop solutions that are exactly adapted to the plant and the installation situation. Modified versions with the same footprint and double throughput are already in use at many customers. We can also consider the dimensions of a third-party product and replace it with a modified Witte version.
Manufacturers, Traders, Service provider
WITTE PUMPS & TECHNOLOGY GmbH
FOLLOW US 
WITTE WORLWIDE
© 2017 | WITTE PUMPS & TECHNOLOGY GmbH