Dynamic Inline Mixer, Type DLM/S HP

For plastic and polymer industry

Mixers

Requirements on mixing technology for mixing of additives  or master batches into high viscous polymer (hot melt of plastic) are: pressures up to 160 bar (2500 psig), viscosities up to 10,000 Pas and temperatures of up to 330°C (626°F).

Examples of products to mix: Polyethylen PE, Polyamide PA, Polyethylelene terephtalate PET, Polymethyl metacrylate PMMA, Polybutylene teraphtalate PBT or Polycarbonate PC. Dynamic inline mixer type DLM/S HP adapts to a wide range of capacities (kg/h) and to a wide range of additive concentrations just by changing the mixer rotational speed.

DLM/S HP

Materials
carbon steel • AISI 304 • AISI 316L • acid resistant tantal coating
Seals
Visco seal with stuffing box package
Cleaning
Can be cleaned to 130°C, while the "HY" hygienic version is especially free of inaccessible areas
Connections
DIN or ANSI flange (25 bar); INDAG high pressure flange (40-160 bar)
Positioning
Horizontal

DLM/S HP

Rotational speed
180 rpm to 550 rpm
Pressure levels
25 bar • 40 bar • 100 bar • 160 bar
Capacities
10 kg/h to 10,000 kg/h (higher on inquiry)
Temperatures
up to 330°C
Viscosities
1mPas to 10,000,000 mPas

Technical advantages of DLM/S HP

  • Dynamic inline mixer type DLM/S HP is especially designed for mixing. Process requirements are efficiently converted into technical equipment.
     
  • Dynamic inline mixer DLM/S HP creates minor pressure loss (< 1 bar; < 14 psi). Existing pump will operate at approximately the same discharge pressure and should not need to be upgraded.
     
  • The design of dynamic inline mixer reduces dead spots to a minimum. Turning of rotor supports cleaning capability.
     
  • Rotor and stator work contact-free and therefore there is no wear. The rotor bearings are located in an external bearing housing and are not in contact with the product.
     
  • INDAG inline mixer is easy to disassemble.
     
  • Drive power is efficiently transformed into mixing energy.
     
  • Upon request INDAG delivers complete systems including metering pumps and additional equipment.

Commercial advantages of DLM/S HP

  • Easy way to improve product quality and to upgrade product characteristics
  • Quick return on investment.
  • Realize higher prices and higher margins for upgraded and unique products.

Sizes

DLM/S HP 0

Capacity* t/h
0,01-0,1
Connections DN
50
Connections inch (optional)
2’’
Power kW
2,2-4
Rotational speed 1/min
400 - 600
* Capacity depends on product. Higher capacities on inquiry.

DLM/S HP 3

Capacity* t/h
4
Connections DN
150
Connections inch (optional)
6’’
Power kW
20 - 30
Rotational speed 1/min
120 - 300
* Capacity depends on product. Higher capacities on inquiry.

DLM/S HP 1

Capacity* t/h
0,5
Connections DN
80
Connections inch (optional)
3’’
Power kW
5,5-11
Rotational speed 1/min
200 - 450
* Capacity depends on product. Higher capacities on inquiry.

DLM/S HP 4

Capacity* t/h
10
Connections DN
200
Connections inch (optional)
8"
Power kW
37 - 55
Rotational speed 1/min
100 - 250
* Capacity depends on product. Higher capacities on inquiry.

DLM/S HP 2

Capacity* t/h
1,5
Connections DN
100
Connections inch (optional)
4’’
Power kW
15-22
Rotational speed 1/min
150 - 350
* Capacity depends on product. Higher capacities on inquiry.

DLM/R-6

Max. capacity* m³/h
30-60
Connections DN
125
Connections inch
5’’
Power* kW
30-75
Oops, an error occurred! Code: 202412211115171e379a33

Do you need further information?

Data Protection Declaration.

If you send us inquiries by means of our contact form, your personal data will be stored on the legal basis of Art. 6(1)f DSGVO (General Data Protection Regulation). Further accessories can be found in our Data Protection Declaration.